设焊接专机主要配置及功能：
The main configuration and function of welding machine:
1、床身结构：焊接结构，保证工件旋转直径和床身的强度。床身进行热处理。焊枪相对固定，工件旋转，焊接位置水平。工件由三爪卡盘夹紧随动，中间有升降支撑机构。
1, bed structure: welding structure, ensure the strength and the diameter of the workpiece rotation. The bed of heat treatment. The torch is relatively fixed, the workpiece rotation, horizontal position welding. Three jaw chuck clamping workpiece by servo, the middle lifting supporting mechanism.
2、主轴箱：主轴带有间隙微调装置，以便于轴承磨损后有效调节主轴跳动，主轴径向与端面跳动＜0.15mm。尾座与主轴同轴度＜0.15mm。
2, the spindle box: spindle with clearance adjustment device, in order to facilitate the adjustment of the spindle bearing wear after the spindle runout, radial and end face runout 0.15mm. The coaxial degree of tailstock and spindle 0.15mm.
3、工件支撑：采用直线导轨，个工件手工调整位置以及高度，调整后自动控制上升和下降。工件支撑机构可沿导轨纵向移动，以适应不同长度工件的焊接。
3, the workpiece support: the use of linear guide, manual adjustment of the position and height of the workpiece, adjusted to automatically control the rise and fall. The workpiece supporting mechanism can move along the longitudinal direction of the guide rail to adapt to the welding of workpieces with different lengths.
4、焊枪系统：电机驱动（自动/手动），每一圈上升高度可调，焊枪角度可调，焊枪微调，焊枪左右可移动。
4, the torch system: motor drive (automatic / manual), each lap welding torch height adjustable, adjustable angle, welding torch can move about fine-tuning.
5、摆动系统：焊枪要有摆动和提升功能，来实现在焊接过程中焊枪的自动提升和摆动，以完成多层焊，填满焊道。摆动速度:0～100回每分钟。摆动范围:0～25mm。
5, the system should have: welding torch swing swinging and lifting function, to achieve automatic lifting and swing in the process of welding torch, to complete the welding, weld fill. Swing speed: 0 to 100 minutes per minute. Swing range: 0 ~ 25mm.
泰安扬帆数控科技有限公司（13345281377）主要产品有焊接自动化成套装备、数控切割机、工业焊接机器人和数字化逆变焊接电源、焊缝跟踪系统及焊接摆动器 |
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。